Skip to content

Release 0.2.0-alpha.1

The first batch of the project's improvement plan, a stage: what the plan has finished so far, 30 of its 62 phases (issue 1166 follows them, phase by phase). Another batch follows in a later release, with the plan's phases still open. In this one: the recommended settings in a new install, and Apply recommended for one installed before; PPPoE named; pfsync and a CARP change of master with connections in hardware; speed and duplex chosen on both families' sockets; the Intrusion Detection's inspection threads per port; phase 3's additions to XGS: Settings, a certificate import page and TACACS+; the host's hardware watchdog armed at install; the switch's queues for the plugins. Beside it, the plugins' releases of the same batch: os-netreport 1.0.8, os-blocklists 1.0.4, os-trafficpriority 1.0.1, and the first releases of four new plugins - os-appcontrol, os-useridentity, os-quota and os-modsecurity 1.0.0 - which XGS: Updates' Plugins tab, Problem Reports and About list from this release on. What each change ran on before its merge is in its pull request. On 2026-11-20 verify.sh passed on the second XGS 3300 and on the XGS 136 with main at 743c45a9, this release's code but for two later changes: a workflow's message (#1203), and the plugin lists of the four new plugins (#1206), whose list and check ran on the second XGS 3300 before the release.

Fixes

  • Four faults the lab appliances' problem reports showed: the flows page's runs at once, the relay's reason, a port's lost link, a panic reported twice (#1199)

Improvements and additions

  • npuep: the receive queue as the flow id (giu.rx_flowid, off by default) (#1151)
  • XGS: Overview says when no connection runs in hardware (#1152)
  • npuep: a native netmap adapter for each front port (hw.npuep.netmap, off by default) (#1154)
  • Inspect path: no automatic flow through a port in netmap mode, and Suricata's own bypass for the inspected part (#1156)
  • The first batch of the improvement plan: capture copies, the console by address, the fail-to-wire relay, the coprocessor gone at 50 s, link speed, and the switch chip by hand (#1157)
  • Phase 1 of the improvement plan: the recommended settings in a new install, Apply recommended for one installed before, and the new views (#1158)
  • Phase 2, first part: PPPoE named, pfsync told of hardware states, an XGS 3300 socket's speed and duplex, a lagg over front ports (#1163)
  • Phase 2, second part: a lost link's connections back to the host, a lagg's destination on the XGS 136, its UDP states kept (#1164)
  • The XGS 136's switch sockets: speed and duplex can be chosen, half duplex read and said (#1165)
  • pfsync to a peer: a TCP connection's numbers written for its copy, and a gigabyte of room at the make (#1167)
  • The XGS 3300 says half duplex of a negotiated link that runs half (#1168)
  • A CARP change of master, and the coprocessor's hardware following it when XGS: Settings asks (#1169)
  • XGS: Settings, "Inspection threads per port": netmap rings for the Intrusion Detection's ports, and each frame's receive queue as its flow id (#1171)
  • Phase 3, packages 3.2 to 3.9: a rule's tag kept out of hardware, router advertisements from listed senders, IPsec rekey margin and IPComp, a certificate import page, service aliases, a daily PPPoE reconnect, gateway alerts, read-only privileges (#1174)
  • Phase 3, package 3.10: TACACS+ as a server type of System: Access: Servers, through FreeBSD's own libtacplus (#1175)
  • OPNsense 26.7.9 on the XGS 136 and the second XGS 3300: badges, compat.json, the machine pages (#1180)
  • install.sh arms the host's hardware watchdog before the first reboot; os-watchdog's watchdogd taken over (#1183)
  • A connection a rule sends by a gateway (route-to, reply-to) keeps that gateway in hardware (#1184)
  • XGS: Updates: a Driver row for the kernel the next boot takes; the follower lets go of a fall-back it armed (#1185)
  • hwdrop.py: a connection dropped by a cut handed back to the host by address once the cut is over (#1186)
  • os-trafficpriority joins XGS: Updates, Problem Reports and About (#1187)
  • octep, npuep: a connection taken out of hardware gives pf its last counts, with the tail from the reclaim's answer (#1189) (#1191)
  • Advisories checked against the appliances: CVE-2026-98432 (#1200)
  • The switch's queues for the plugins, and port 0's pause off while there are minimums (#1201)
  • lists_cut.py: a list taken out of the watch and put back cuts what it names again (#1202)
  • plugin-release-pr.py: gh's own words in the run's log when it fails (#1203)
  • The plan's new plugins join XGS: Updates, Problem Reports and About: os-appcontrol, os-useridentity, os-quota and os-modsecurity (#1206)

Documentation

  • Measurements: the check before 0.1.0-alpha.15.2, 2026-11-07 (#1146)
  • Pages guide: every XGS page photographed again, in English and Arabic (#1149)
  • Site: the pictures inside a page's folded sections are shown (#1150)
  • Docs: the measurements of 2026-11-10 and 2026-11-11, and the pages they correct (#1155)

The release, with its files: v0.2.0-alpha.1 on GitHub.

Discussion

The discussion of this page is held in the project's GitHub Discussions. Showing it here loads giscus from giscus.app and GitHub, and writing in it needs a GitHub account - what that means.