Skip to content

Copies for a packet capture on the second XGS 3300: every frame to 500 Mbit/s on one boot, checked at the PC's 10G cards, 2026-11-11

A packet capture on the appliance - tcpdump, or Interfaces: Diagnostics: Packet Capture - sees a connection only until the coprocessor forwards it; after that its frames no longer cross the host. XGS: Settings Copies for packet capture has the fast path send the host two copies of every frame it forwards, one for each port the frame crosses, and the driver shows each copy to that port's capture (discoveries 12 and 17). On 2026-10-25 the second XGS 3300, over vendor version 22, copied every frame of a 200 Mbit/s stream before one of its boots, and after it only the stream's first 1,556 to 1,560 data frames (the measurement). Whoever reads such a capture needs to know whether it holds every frame. So on this board's boot of 2026-11-11 one stream in hardware was counted at both of its ends, on the PC's two 10 Gbit/s cards, and by a capture on the 3300, with the copies off and on.

The whole page, with how it was taken and what it does not show: Copies for a packet capture on the second XGS 3300: every frame to 500 Mbit/s on one boot, checked at the PC's 10G cards, 2026-11-11.

Discussion

The discussion of this page is held in the project's GitHub Discussions. Showing it here loads giscus from giscus.app and GitHub, and writing in it needs a GitHub account - what that means.