Skip to content

Release 0.1.0-alpha.10

A gathered release, with no driver change. XGS: Coprocessor Log keeps the coprocessor's own log on the host, where its resets do not erase it. XGS: Overview's Coprocessor tab shows the fast path's build, which reports carry too, and whether U-Boot and the system copies come from one SDK. XGS: Ports sets each PoE port's limit, 15.4 W or 30 W, kept and set again at every boot. Every page of the XGS section has its icon in the menu, and a finished plugin update's bar leaves XGS: Updates after ten seconds. install/verify.sh counts the front ports the model has and checks npuep only where it is: on an XGS 3300 it read six failures that were not there. An update and an image no longer carry README.md: nothing on an appliance reads it. Measured on 2026-10-30: the update to OPNsense 26.7.8 on all three appliances, each driver rebuilt for the new kernel before the update's own reboot.

Improvements and additions

  • XGS: Updates: a finished plugin update's bar goes after ten seconds (#874)
  • The coprocessor's own log kept on the host: XGS: Coprocessor Log (#876)
  • XGS: Overview: the fast path's build, in the Coprocessor tab and in reports (#877)
  • XGS: Overview: whether U-Boot and the system copies come from one SDK (#879)
  • XGS: Ports: a PoE port's limit, 15.4 W or 30 W (#889)
  • verify.sh: count the front ports the model has, and check npuep only where it is (#892)
  • Menu: an icon for each page of the XGS section (#895)
  • An update and an image no longer carry README.md or contrib/mvsw/README.md: nothing on an appliance reads them (#897)

Documentation

  • docs: Dragonfly's settings were the vendor's when the tunnel was lost (#878)
  • docs: four "not yet"s that were done, struck and corrected (#883)
  • docs: traffic through the module's ports was measured from 2026-10-17 (#884)
  • measurements: HTTP through the XGS 136 the datasheet's way (#886)
  • measurements: PoE with a device on each port of the XGS 136 (#887)
  • parity: the PoE row opens with what is now true (#888)
  • README: three of the XGS 136's badges brought up to date (#891)
  • docs: OPNsense 26.7.8 on all three appliances, the kernel followed on both families - badges, compat.json and the machine pages (#898)
  • README: the project's YouTube channel, which the site's footer carries too (#899)

The release, with its files: v0.1.0-alpha.10 on GitHub.

Discussion

The discussion of this page is held in the project's GitHub Discussions. Showing it here loads giscus from giscus.app and GitHub, and writing in it needs a GitHub account - what that means.